Square Collection

Square necklace (RN2), 3 squares in 1.5 cm in gold, silver and yellow glass on silver-in-glass. This model is also available larger with 2.1 cm squares (RN3)

Square hanging earrings 2.1 cm (R2EH), also available smaller in 1.5 cm (R15EH)

Square stud earrings 2.1 cm (R2ES), also available smaller in 1.5 cm (R15ES)

Square ring (R2R) 2.1 cm, all our rings have an adjustable fitting which can get adapted to every finger.

Square ring (R15R) 1.5 cm, we can produce big rings in 2,5, 3 or 4 cm on order

Square pendant (R2P), available in 2.1 cm, 3 cm, 4 cm or 5 cm

Square necklace (RN72si), 7 pieces in 1.5 cm, available in different combinations

Square necklace (RN72), 7 pieces in 1.5 cm, available in different combinations

Square cuff bracelet (R4A) 4 cm, adjustable to every arm

Square pendant (4 cm) and earrings (2 cm), sandblasted single pieces, available in different designsWe still have some Squares on stock in larger sizes and also a small range of silver-in-glass and white gold-in-glass single pieces. As they are all made by hand, they come always different.

Square necklace, hanging earrings and ring in silver-in-glass (RN5sim Set)Our gold, white gold and silver-in-glass pieces will never tarnish, as the precious metal is encased forever safely inside of the glass vacuum.

Square necklace (RN5m) and earrings (R2EHm), single pieceWe can offer a nice choice of different single piece models in our workshop.
- The visible Gold-in-Glass surface of your jewellery is absolutely stable and will never change its look.
- You only have a slight risk of breaking, if it falls down or bangs against something hard.
- The coating of the closures on the back does not last forever.
- Although the closures are coated with gold or silver, they will darken after some time from either acid sweat, soap, perfume, or simply being worn.
- To recover a clean surface, clean the closure by gently rubbing it with a silver cleaner. A brass or silver coloured closure will be the result.
- All our closures are nickel free (anti-allergenic) metal with gold or silver coating, unless specified differently.
- Therefore our jewellery is perfect for most persons with allergies.
- We recommend pulling gently from time to time on the fittings, to make sure that they are still strongly connected.
- All our wire chains are made by hand out of 4 to 6 strands, according to size. Each strand consists of 7 miniscule stainless steel wires inside of a skin-friendly nylon coating.
- They are very solid, but never fold them! The wire has a memory and a trace of the fold will remain after.
- To store them, hang them straight or roll them gently into a circular shape.
- The models C 38 up to C 50 fit even through very small closures, which are sometimes necessary in our designs.
- All our closures are nickel free (anti-allergenic) metal with pure gold or silver coating, unless specified differently. Therefore our jewellery is perfect for most persons with allergies.
- We use only the best wire quality, which shouldn’t change colour, but this depends a bit on individual skin chemistry.
- We recommend pulling gently from time to time on the fittings, to make sure that they are still strongly connected.
- In case that one of the back side fittings comes off, you can repair your jewellery by yourself with slow drying 2 component glue (like Araldite).
- To do so, you need to clean both surfaces with surgical spirit.
- Mix your glue carefully (exactly the same amount of both components) and apply a thin layer on each part.
- Press it together and let it dry overnight.
- Fresh glue can be removed with cloth and dry glue with a razor blade.
- Small damages on the glass can get fixed with UV glue for glass or superglue, but they will remain partially visible.
- If the adjustable ring fittings come off one day, we recommend bringing your gold-in-glass piece to a silversmith to get a permanent ring fitting of your choice made in your size.