Gold Creations
All our Gold Creation jewels are created from broken or rejected tiles from the Matrimandir, which have been recycled and upcycled by Birgitta. They are all single piece creations, one of a kind. We have a rich selection of sets (necklace + earrings) in all kind of different shapes, combinations and sizes. We also have earrings, bracelets, finger rings and hairclips. Most necklaces are fixed on 45 cm chain wires, which can easily get prolonged.

Cute small stud earrings, available in gold-in-glass, silver-in-glass or white gold-in-glass. You can order them very tiny 4-5 mm (K05ES) or slightly larger 6-8 mm (K08ES).

The tiny stud earring (K05ES) on a model.

They are also available as hanging earrings (K05EH) or (K08EH) in gold-in-glass, silver-in-glass or white gold-in-glass.

Combined Gold Creation hanging earrings (K3EHg+si), single piece pair 1.6 cm (total height 3.7 cm).

Square golden hanging earrings, available in 1 - 1.5 cm (K1EH). You can order them also as stud earrings (K1ES).

Gold Creation hanging earrings (K2EH), single piece pair 1 x 0.6 cm (total height 3 cm).

Tiny square golden hair pin, available in 1 cm (K1HP).

Large golden hair clip (K8H), single piece, approx. 8 x 1.8 cm (clip 6 - 7 cm)

Small golden crocodile hair clips (K5H), single piece, approx. 4,7 x 0.9 cm

Gold Creation ring, single piece, 2 x 1.8 cm (K4R), all our rings have an adjustable fitting which can get adapted to every finger.

Various Gold Creation rings, single pieces (KR). You can see many different designs in our workshop.

Extravagant silver Creation set (KS3Csi m), single piece with earrings. We have a large variety of completely different models to select from.

Gold Creation cuff bracelet (K5A) 4.5 cm, single piece, on a gold plated brass or sterling silver cuff, which is adjustable to every arm.

Various Gold Creation cuff bracelet tops (K5A), single pieces, they still have to get glued on a gold plated brass or sterling silver cuff.

Sparkling Gold Creation set (KSPN1 e), single piece with tiny earrings. We have a large variety to select from.

A choice of our elegant Gold Creation set (KS), single pieces with earrings. We have a large variety of completely different models to select from.

Elegant Gold Creation set (KS4B j), single piece with earrings.

3 sparkling Gold Creation sets (KSPN2 d, e, g), single pieces with hanging earrings
- The visible Gold-in-Glass surface of your jewellery is absolutely stable and will never change its look.
- You only have a slight risk of breaking, if it falls down or bangs against something hard.
- The coating of the closures on the back does not last forever.
- Although the closures are coated with gold or silver, they will darken after some time from either acid sweat, soap, perfume, or simply being worn.
- To recover a clean surface, clean the closure by gently rubbing it with a silver cleaner. A brass or silver coloured closure will be the result.
- All our closures are nickel free (anti-allergenic) metal with gold or silver coating, unless specified differently.
- Therefore our jewellery is perfect for most persons with allergies.
- We recommend pulling gently from time to time on the fittings, to make sure that they are still strongly connected.
- All our wire chains are made by hand out of 4 to 6 strands, according to size. Each strand consists of 7 miniscule stainless steel wires inside of a skin-friendly nylon coating.
- They are very solid, but never fold them! The wire has a memory and a trace of the fold will remain after.
- To store them, hang them straight or roll them gently into a circular shape.
- The models C 38 up to C 50 fit even through very small closures, which are sometimes necessary in our designs.
- All our closures are nickel free (anti-allergenic) metal with pure gold or silver coating, unless specified differently. Therefore our jewellery is perfect for most persons with allergies.
- We use only the best wire quality, which shouldn’t change colour, but this depends a bit on individual skin chemistry.
- We recommend pulling gently from time to time on the fittings, to make sure that they are still strongly connected.
- In case that one of the back side fittings comes off, you can repair your jewellery by yourself with slow drying 2 component glue (like Araldite).
- To do so, you need to clean both surfaces with surgical spirit.
- Mix your glue carefully (exactly the same amount of both components) and apply a thin layer on each part.
- Press it together and let it dry overnight.
- Fresh glue can be removed with cloth and dry glue with a razor blade.
- Small damages on the glass can get fixed with UV glue for glass or superglue, but they will remain partially visible.
- If the adjustable ring fittings come off one day, we recommend bringing your gold-in-glass piece to a silversmith to get a permanent ring fitting of your choice made in your size.